BMYLH - 250030-757, SULLAIR LOW TEMP FLUID
- MSDS: BMYLH
- Manufacturer: D A LUBRICANT CO
- Product Name: 250030-757, SULLAIR LOW TEMP FLUID
- National Stock Number: 9150-00N028866
Product Identification
Product ID:250030-757, SULLAIR LOW TEMP FLUID
MSDS Date:01/11/1990
FSC:9150
NIIN:00N028866
MSDS Number: BMYLH
Responsible Party
INDIANAPOLIS, IN 46208
US
Emergency Phone: 317-923-5321;216-391-8300
Info Phone: 317-923-5321;216-391-8300
Preparer: J.T.C.
Cage: 30719
Contractor
Telephone: 317-923-5321/216-391-8300 OTHER HRS
Cage: 30719
Ingredients
MINERAL OIL PETROLEUM DISTILLATES, HYDROTREATED HEAVY
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: 60-99%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3;10STEL(MIST)
PHOSPHORODITHIOIC ACID, DIALKYLESTER, ZINC SALT; (ZINC
CAS: 68457-79-4
RTECS: TD5550000
Fraction By Weight: 0.5-1.5%
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE RESPIRATORY SYSTEM,
SKIN AND/OR EYE IRRITATION. INGESTION MAY CAUSE NAUSEA, CRAMPS,
DIARRHEA, AND OTHER GASTROINTESTINAL DISORDERS. CHRONIC: EXCESS
MIST MAY CAUSE RESPIRATORY PROBLEMS . EXCESS SKIN CONTACT MAY CAUSE
DRYNESS.
Explanation of Carcinogenicity:CAS NO. 64742-54-7 (IARC) GROUP 1
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MIN AND CALL A PHYSICIAN. INHAL: IF AFFECTED, REMOVE TO FRESH AIR,
ADMINISTER O2 AND CALL MD. SKIN: WASH THOROUGHLY WITH PLENTY OF
WATER AND SOAP. INGEST: SEEK A PHYSICIAN IMMED; SHOW MSDS OR
LABEL; DO NOT INDUCE VOMITING. WASH SOILED CLOTHING BEFORE WEARING
AGAIN.
Fire Fighting
Flash Point:>370F,>188C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE, SAND
OR EARTH.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR NIOSH/MSHA APPROVED
SCBA AND FULL PROTECTIVE EQUIPMENT . TREAT AS A CLASS B FIRE. USE
WATER TO COOL THREATENED CONTAINERS.
Accidental Release
Spill Release Procedures:ELIMINATE SOURCE IF SAFE TO DO SO. PREVENT
FROM ENTERING WATERWAYS AND DRAINS. WEAR SUITABLE PERSONAL
PROTECTIVE EQUIPMENT. DIKE AND ABSORB WITH INERT MATERIAL AND
TRANSFER TO A SEALED APPROVED CONTAI NER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE ONLY IN WELL VENT AREAS. AVOID
PRLNGD/ RPTD BRTHG OF FUMES, VAP/MIST. AVOID CNTCT W/EYES & SKIN.
DO NOT TAKE INTENALLY.
Other Precautions:IN CASE OF ACCIDENT/ILLNESS, CONSULT MD IMMED; SHOW
LABEL &/OR MSDS. KEEP OUT OF REACH OF CHILDREN. ALWAYS READ &
FOLLOW DIRECTIONS ON PROD LABEL. ADDNL TECHNICAL INFO &/OR MSDS ARE
AVAIL UPON REQUIES T. FOR PROFESSIONAL & INDUST (SUPP DATA)
Exposure Controls
Respiratory Protection:USE ONLY IN WELL VENTILATED AREAS. IF
VENTILATION IS INADEQUATE, WEAR NIOSH/MSHA APPROVED RESP EQUIPMENT.
Ventilation:LOCAL: RECOMMENDED. MECHANICAL: REQUIRED. SPECIAL: AVOID
HEAT OR FLAME.
Protective Gloves:OIL/SOLVENT RESISTANT
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:OIL/SOLVENT RESISTANT CLOTHING AND FOOTWEAR.
IF VENTILATION IS INADEQUATE, WEAR NIOSH/MSHA APPROVED RESP EQUIP.
Work Hygienic Practices:GOOD PERSONAL HYGIENE IS MOST IMPORTANT. WASH
THOROUGHLY AFTER USING.
Supplemental Safety and Health
OTHER PROT EQUIP: USE ONLY. EMPTY CONTAINERS RETAIN RESIDUE WHICH CAN
BE DANGEROUS. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND OR EXPOS SUCH CONTAINERS TO HEAT, FLAME, SPARKS OR OTHER I
GNITION SOURCES: THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NIL
Spec Gravity:0.86-0.90
Evaporation Rate & Reference:< 0.1 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT BROWN FLUID WITH MILD PETROLEUM ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:PYROLOYSIS PRODUCTS, CO, SOX.
COMBUSTION PROD: CO; CO2; SMOKE; S, N, P, CA, ZN COMPOUNDS.
Disposal
Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.